Easy methods to Substitute a Dryer Belt

Studying methods to change your dryer belt will help prevent cash. You do not have to be a do-it-yourselfer to placed on a brand new dryer belt. It’s fairly a typical restore, and you may solely want a number of instruments to do it. You may want: Phillips screwdriver, putty knife, 5/16 socket or nut driver, and a small container for the screws. This text will clarify methods to change a dryer belt, for the fashions with the lint filter on high.

In case your dryer has the lint filter on the highest, right here is the best way to switch the belt Dryer Repair Los Angeles. The very first thing it is best to at all times do earlier than performing repairs on any equipment is unplug the unit from energy. Not doing so may end in extreme damages to your self and your equipment. Slide out your lint filter, and take away the 2 screws which might be uncovered. Subsequent, take your putty knife and slide it beneath the highest of the dryer, pop up the highest by lifting up on the left and proper corners on the entrance of the dryer. Then elevate up the highest, flip it again, and prop it on a wall if you happen to can.

Now that the within of the dryer is uncovered, you will want to take away the entrance panel to get to the belt. There are two screws you could take away to take off the entrance panel, and they’re positioned on the left and proper inside corners. As soon as the screws are taken out, you possibly can elevate off the entrance of the dryer. Typically you will have to take away the door swap to utterly take away the entrance.

Now you possibly can take away your previous belt. You might want one other individual that will help you to carry up the drum for this half. Take out your new belt, and place it over the drum with the grooves touching the drum, ensure that it isn’t twisted in any other case it should simply fall off when you begin your machine. Subsequent, you will have to get beneath the drum the place the motor and pulley are positioned. The belt might want to undergo the pulley, and connected to the motor shaft. If this was performed appropriately, the pulley will apply pressure to the belt.

Now you are performed with the set up of your new dryer belt. And to complete you will have to re-assemble your dryer. Whenever you put again the entrance panel of your machine, ensure that the tabs on the underside are lined up with the panel itself, it ought to simply snap into place. Substitute the screws on the within proper and left corners, then flip the highest of the dryer again down. This also needs to snap again into place. Then simply put again the screws on the highest the place the lint filter goes, and slide the lint lure in. The very last thing is to plug in your dryer, and you will be again in enterprise.

I hope this text helped you learn to change a dryer belt!

Leave a comment

Your email address will not be published. Required fields are marked *